![]() The Linux User Guide and Linux Reference Manual provideĪdditional information. The i.MX Linux Board Support Package (BSP) is a collection of binary files, source code, and supportįiles that are used to boot an Embedded Linux image on a specific i.MX development platform.Ĭurrent releases of Linux binary demo files can be found on the i.MX Linux download page. This section is applicable ONLY if attempting to load a Linux operating system on the If you stop the U-Boot process, you can run the following command to continue with Variable, bootdelay, decreases and before it times out Tip: To proceed to U-Boot, press any key before the value of the U-Boot environment Once Linux is booted, login using the user name root On Windows as an example 1.7 Congratulations! Linux® has booted! Process, it continues to boot the Linux kernel. Information is printed in the smaller number serial console for the Cortex-A7 ( COM9 on Windows as an example and /dev/ttyUSB* on Linux). Image on the SD card, the U-Boot execution should begin automatically. ![]() The fuses to define the media where it is expected to have a bootable image. With the default boot switch setup, the code reads ![]() Processor starts executing from the on-chip ROM code. Power the board by flipping the switch ( SW1). To see the user interface provided with the SD card image binary connect a monitor via the HDMI connectorĬlick here to see the Boot Switch Setup 1.6 Connect Power SupplyĬonnect the 5V power supply cable to the 5V DC power jack ( J1). 4.6.2 Cortex-A7/Cortex-M4 RPMsg Ping Pong demo.4.2 Download NXP FreeRTOS source and demos. ![]() Burn the NXP Linux BSP image to the board Download an NXP Linux BSP pre-built image ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |